next up previous
Next: About this document Up: Design Evaluation and Partner Previous: Summary and Conclusions

References

1
Boothroyd, G., Dewhurst, P., and Knight, W.A., 1992, ``Selection of materials and processes for component parts,'' in Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, Georgia.

2
Bralla, J.G., Ed. Handbook of Product Design for Manufacturing. McGraw-Hill Book Company, New York, 1986.

3
Candadai, A., S. Champati, J.W. Herrmann, I. Minis, and V. Ramachandran, ``Information needs in agile manufacturing,'' International ASME Computers in Engineering Conference, 1994.

4
Candadai, A., J.W. Herrmann, and I. Minis. ``A Group Technology-based variant approach for agile manufacturing,'' Proceedings of the ASME International Mechanical Engineering Congress and Exposition. San Francisco, California, November, 1995.

5
Candadai, A., J.W. Herrmann, I. Minis, and V. Ramachandran, ``Product and process information models for microwave modules,'' 1994 ASME Winter Annual Meeting.

6
Clark, D.S. and W. A. Pennington. Casting Design Handbook. American Society for Metals. Metals Park, Ohio, 1962.

7
Conway, M., Simple User Interface Toolkit (SUIT) Reference Manual, Version 2.3, The University of Virginia, Charlottesville, Virginia, 1992.

8
Dym, J.B. Injection Molds and Molding-A Practical Manual. Van Nostrand Reinhold Company. New York, 1979.

9
Farag, M. Materials and Process Selection in Engineering. Applied Science Publishers Ltd. London, 1979.

10
Gregory, R. E., ``Source Selection: A Matrix Approach,'' Journal of Purchasing and Materials Management, pp. 24-29, 1986

11
Gupta, P. and Nagi, R., ``Flexible optimization framework for partner selection in agile manufacturing,'' Proceedings of the 4th IE Research Conference, (May 1995a).

12
Gupta, S., J.W. Herrmann, G. Lam, and I. Minis, ``Automated High Level Process Planning for Agile Manufacturing,'' 1995 ASME Design Technical Conference.

13
Harhalakis, G., Kinsey, A., and Minis, I., 1992, ``Automated group technology code generation using PDES,'' in Proceedings of the Third International Conference on Computer Integrated Manufacturing, Rensselaer Polytechnic Institute, Troy, New York.

14
Heine, R.W., C.R. Loper, and P.C. Rosenthal. Principles of Metal Casting. McGraw-Hill Book Company. New York, 1967.

15
Herrmann, J.W., I. Minis, V. Ramachandran, ``Standards and partner selection in agile manufacturing,'' Design Engineering Program, Internation Mechanical Engineering Congress and Exposition, San Francisco, California, November 12-17, 1995.

16
HOOPS© Graphics System Reference Manual, Release 3.20, Ithaca Software, Alameda, California, 1992.

17
IEEE/PDES Inc., ``Cal-Poly Task Team Extension, Final Report,'' 1988.

18
ISO 9000, International Standards for Quality Management, International Organization for Standardization, Geneva, Switzerland, 1993.

19
ISO 10303-1, Product Data Representation and Exchange, International Organization for Standardization, 1992.

20
ISO 10303-41, Product Data Representation and Exchange - Part 41: Integrated Resources: Fundamentals of Product Description and Support, International Organization for Standardization, 1993.

21
ISO 10303-42, Integrated resources: geometric and topological representation, International Organization for Standardization, 1993.

22
ISO 10303-43, Product Data Representation and Exchange - Part 43: Integrated Resources: Representation Structures, International Organization for Standardization, 1993.

23
ISO 10303-48, Product Data Representation and Exchange - Part 48: Integrated Generic Resources: Form Features, International Organization for Standardization, 1992.

24
Iyer, S., Identification and Ranking of Similar Parts in Agile Manufacturing, M.S. Thesis, Department of Industrial Engineering, State University of New York, Buffalo, New York, 1995.

25
Iyer, S. and Nagi, R., ``Identification and ranking of similar parts in agile manufacturing,'' Proceedings of ASME Winter Annual Meeting, (1994).

26
Lamberson, L. R., Deiderich, D., Wuroi, J., ``Quantitative Vendor Evaluation,'' Journal of Purchasing and Materials Management, pp. 19-28, 1976.

27
Monczka, R.M., Guinipero, L.C., Reck, R.F., ``Perceived Importance of Supplier Information,'' Journal of Purchasing and Materials Management, Vol. 17, pp. 21-29, 1981.

28
ObjectStore© Database Management System, Release 3.0 for UNIX, Object Design Inc., Burlington, Massachusetts, 01803.

29
OIR Multi-M Code Book and Conventions, 1986, Organization for Industrial Research, Waltham, Massachusetts.

30
Saaty, T.L., ``Axiomatic foundation of the Analytic Hierarchy Process,'' Management Science, 32, 841-855 (1986).

31
Saaty, T.L., Multicriteria decision making: The Analytic Hierarchy Process, RSW Publications, (1990).

32
Sheridan, S.A., Ed. Forging Design Handbook. American Society for Metals. Metals Park, Ohio, 1972.

33
Spatial Technology Inc., ACIS© Geometric Modeler, Version 1.4.1, Boulder, Colorado, 1993.

34
United States Air Force, Military Specification: Inspection System Requirements, MIL-I-45208A, 1981.

35
United States Air Force, Military Specification: Quality Program Requirements, MIL-Q-9858A, 1985.

36
Weber, C. A., Current, J. R., Benton, W. C., ``Vendor selection criteria and methods,'' European Journal of Operational Research, Vol. 50, No. 1, 1991.


Edward Lin
Fri Oct 27 15:01:45 EDT 1995